FrequencyDC~40GHz, Attenuation6dB, 10W, 50Ω, 2.92-JK
Parameters | Min | Typical | Max | Units |
Frequency | DC | ~ | 40 | GHz |
Attenuation | 4.5 | 6 | 8 | dB |
VSWR | 1.35 |
Power | 10W Design assurance |
Impedance | 50Ω |
Connector | 2.92-JK |
Connector material | Stainless steel |
Surface | Black |
Product shell material | Aluminum |
Work Temp. | -40~+85℃ Design assurance |
1. When installing attenuators, it is necessary to consider sufficient heat dissipation space and avoid installing them next to equipment with high heat output, otherwise the power capacity will decrease;
2. Small power attenuators do not have input and output directions, nor do they indicate directions. When high-power attenuators have input and output port markings, they must be connected to the equipment in the specified direction, otherwise the attenuator may burn out.