Frequency0~50GHz, Attenuation30dB, 20W, 50Ω, 2.4-JK
Broadband, high-power.
Parameters | Min | Typical | Max | Units |
Frequency | 0 | ~ | 50 | GHz |
Attenuation | 28.5 | 30 | 32.7 | dB |
VSWR | 1.55 |
Power | 20W Design assurance |
Impedance | 50Ω |
Connector | 2.4-JK |
Connector material | Stainless steel |
Surface | Black |
Product shell material | Aluminum |
Work Temp. | -40~+85℃ Design assurance |
Other | In put 2.4-J |
1. When installing attenuators, it is necessary to consider sufficient heat dissipation space and avoid installing them next to equipment with high heat output, otherwise the power capacity will decrease;
2. Small power attenuators do not have input and output directions, nor do they indicate directions. When high-power attenuators have input and output port markings, they must be connected to the equipment in the specified direction, otherwise the attenuator may burn out.
Frequency GHz | S11 VSWR | S12 IL (dB) |
0.01 | 1.02 | -28.86 |
3.57 | 1.01 | -29.42 |
7.14 | 1.05 | -29.6 |
10.71 | 1.02 | -29.67 |
17.86 | 1.27 | -30 |
21.43 | 1.07 | -30.12 |
25 | 1.09 | -30.46 |
28.57 | 1.29 | -30.8 |
32.14 | 1.3 | -31.26 |
39.29 | 1.08 | -32.18 |
42.86 | 1.21 | -32.26 |
46.43 | 1.22 | -32.35 |
50 | 1.2 | -31.67 |