FrequencyDC~8000MHz, Attenuation3dB, 500W, 50Ω, N-JK
Parameters | Min | Typical | Max | Units |
Frequency | DC | ~ | 8000 | MHz |
Attenuation | 3 | 6.5 | dB | |
VSWR | 1.25 |
Power Capacity | 500W Design assurance |
Impedance | 50Ω |
Connector | N -JK |
Connector material | Stainless steel |
Surface | Black |
Product shell material | Aluminum |
Operation Temp. | -40~+85℃ Design assurance |
Other | In Port N-J |
1. When installing attenuators, it is necessary to consider sufficient heat dissipation space and avoid installing them next to equipment with high heat output, otherwise the power capacity will decrease;
2. Small power attenuators do not have input and output directions, nor do they indicate directions. When high-power attenuators have input and output port markings, they must be connected to the equipment in the specified direction, otherwise the attenuator may burn out.